American-lighting LXC4H Bedienungsanleitung PDF herunterladen

120 Volt Xenon Under Cabinet Light

Installation Instructions for models LXC1H, LXC2H, LXC3H and LXC4H

www.americanlighting.com

lens cover

Lens cover clasp

Figure 1

knockouts

remove lens

wire housing

remove screws to

access wire housing

Figure 2

mounting surface

Completed installation

fixture

WARNING: These products may represent a possible shock or fire hazard if improperly installed or attached in any way.

Products should be installed in accordance with the owners manual, current electrical codes and/or the current

National Electric Code (NEC).

Warning:

To avoid electric shock, disconnect power unit prior to installation or replacing lamp.

Caution: Injury to persons and damage to the lamp and/or mounting surface may

result if the xture is pulled from the surface. To reduce the likelihood of such injury or

damage, mount on a surface that is mechanically sound.

Hardwire installation:

1 . Pull the lens cover away from the front edge of the fixture gently rotating toward the back of the fixture.

The lens cover will now be open at a 90° angle to the base of the fixture. (Figure 1)

2. Remove the lens cover from housing gently by sliding each end of the lens toward the front of the unit.

(Figure 2.)

3. To gain access to wires contained inside the fixture, remove the two screws that secure the wire housing

cover to the wiring enclosure. (Figure 2)

4. Lift off wire housing cover and remove whichever knockout is most conveniently located to your 120V

power supply. Standard knockouts are located on the back, the top and at each end of the fixture. (Figure 2)

Supply wires connection: Feed supply wires into the fixture housing. Connect fixture wires

to supply wires following NEC or local codes. Use minimum 18 AWG solid copper wires. Attach

white to white, black to black and ground to ground.

Replace the wire housing cover: Use the existing screws to secure the wire housing

cover in place.

Mounting:

This product is designed to be mounted to the underside of a horizontal surface such as the bottom of a

cabinet or shelf.

1. Hold fixture in desired location.

2. Secure captive mounting screws to appropriate mounting surface with a screw gun.

Install the bulb(s) provided; Xenon JCDGY8 (LHC35B-BP) Do not touch the

bulb with bare hands. Use a soft cloth to handle bulb.

Replace the lens cover by gently pushing the sides of the lens into place

Do not operate without lens cover in place.

WARNING: LIGHTED LAMP IS HOT!

To replace bulb:

1. Turn off fixture and allow lamp or lamps to cool before replacing bulb.

2. Use only 20 watt/120 volt maximum halogen bulb JCDGY8 (LXCP-20BP).

3. Pull the front lens cover away from the edge of the fixture gently rotating towards the back

of the fixture. The lens cover will now be open at a 90° angle to the base of the fixture.

4. Remove old bulb and insert new bulb, using a soft cloth. Do not touch bulb with fingers.

The oil from your hands will shorten the life of the bulb.

5. Close the lens cover and turn on the fixture.

Additional safety measures:

1. Bulb gets hot quickly. Only contact switch when turning on fixture.

2. Do not touch hot lens, lens cover or enclosure.

3. If skin feels warm remove from direct light immediately. Avoid exposure to protect against UV rays.

4. Do not look directly at lighted bulb.

5. Keep lamp away from flammable materials.

6. Do not operate lamp with damaged or missing lens.

RV-1002KB

RV-1002KB 1

Inhaltsverzeichnis

Seite 1 - RV-1002KB

120 Volt Xenon Under Cabinet LightInstallation Instructions for models LXC1H, LXC2H, LXC3H and LXC4Hwww.americanlighting.comlens coverLens cover clasp

Verwandte Modelle: LXC3H | LXC2H | LXC1H |

Kommentare zu diesen Handbüchern

Keine Kommentare

American-lighting LXC4H Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung American-lighting LXC4H herunter. American Lighting LXC4H User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: LXC3H | LXC2H | LXC1H |

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung American-lighting LXC4H